![]() It is the output of the cell, which is what we are going to adjust. You will notice the percentage below the word “Pool Chlorinator.” That percentage is the reading of your pool chlorinator. Step 7:Īfter hitting the right arrow twice, it will take you to the “Pool Chlorinator” settings. Click the right arrow to change the menu option. You can change the menu display on the display monitor using the arrows located on both sides of the Menu button. Step 5:Ĭlick the Menu button, and you should see “Setting Menu” on the display monitor. It will allow your Hayward Aqua Logic or Pro Logic to run back on its original settings after an hour and a half. Setting your system on the time-out mode will ensure that when you forget to turn it back to its normal process, the system will automatically disable the time-out mode. It means that you have already set the system into time-out mode. ![]() When you press the Service button twice, you will notice that the indicator light beside the button will flicker. Remember, if you leave your swimming pool system off for a few days, it will make your pool green and dirty. On the other hand, if you have it turned off, the system will stay stopped until you turn off the Service mode. So, for example, if you set the filter to run and turn on the Service mode, it will continually run until you get the Service mode off. When the system is on Service mode, the system will stay on whatever function you have set. Pressing it twice will put the system into the time-out mode, which is what you would want. Note that by pressing the Service button once, the system will only set on the Service mode, and the light indicator will turn on. Turn the system into time out by pressing the Service button twice. Notice that the tiny indicator light right next to it is turned off and is not flashing. Look for the Service button on the motherboard. It can be noisy, but it is fine, and normal especially if it is running. Chances are, your system will still be running when you conduct this adjustment. Open your Hayward Aqua Logic or Pro Logic motherboard. Adjusting Hayward Aqua Logic and Pro Logic From Motherboard Step 1: If you are looking to adjust your system and want to increase or decrease the salt cell output, follow this guide below, and you will be good to go. But, little do they know that it is straightforward to do it. There are pool owners who are not yet familiar with their system and think it is difficult to adjust the salt cell output. If you own either Hayward Aqua Logic or Pro Logic, this guide will help you adjust your system’s salt cell output. The Hayward Aqua Logic and Pro Logic motherboard have pretty similar features and functionalities.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |